The matters needing attention when using the powder packaging machine are as follows:
1、Please read the instructions carefully before using this product and keep the instructions in a safe place.
2、The grounding wire must be used before the powder packaging machine is used. Before use, please confirm whether the voltage is the same as the voltage of this machine (220V).
3、If the power cord, plug or other parts are found to be damaged, they must be stopped. Please replace and repair them with professional personnel to avoid injury.
4、Pay attention to safety, the internal mold of the machine has high temperature, and the tooth cutter can not reach into the hand during the standby power-on state.
5、The blade unit is sharp and should be safe during handling and cleaning.
6、In case of emergency, take the red emergency stop button directly.
7、Be sure to turn off the power when installing the parafilm.
8、If you seal for the first time, the temperature should be low to high.
9、Regularly add butter to the equipment to reduce part wear.
10、Clean up every day after work, especially in the depths of the lower mold sipe.
11、In the event of a malfunction, non-professionals are not allowed to open the electrical box and contact us in time.
12、Wash the product immediately after use. When cleaning and disassembling parts, please make sure that the product is powered off.